OverviewThe UPS2 is the ideal replacement for UPS 15-50 and 15-60s in domestic heating systems.The UPS2 comes complete with modern motor technology and electronic control which enables it to meet current EuP/ErP standards.The UPS2 comes as a complete pump or as a pump head only.Technical dataFlow, Q: max. 3.3m³/h
Head, H: max. 6 m
Liquid temp.: +2 to +95 °C
Max. system. pressure: 10 bar.
Port to Port: 130mm
EEI : ≤ 0.23
Features and benefitsThree Pumps in One - The UPS2 can be set to meet the requirements of a UPS15 model designed for either 4m, 5m or 6m performance.
Control Box - The control box of the UPS2 can be mounted on the left, right or on the top.
Cable Gland - The cable gland of the UPS2 is the same design as that used on both the UPS15-50 and UPS15-60 circulators. This minimises time taken on changeover. See the easiest way to connect the new terminals by clicking here.
Pump Head - Where the existing pump base is in good condition a pump head option can be chosen in order to minimise installation time by replacing the pump head only.
Dimensions - The UPS2 is almost identical in overall dimensions to the UPS15-50/UPS15-60 models.
Vent screw - The UPS2 is fitted with a screw which allows manual venting to remove air from the heating system.